Marble effect porcelain tiles: ranges, finishes and uses

Updated November 2026

Quick answer: Pyro + Echo's Marble Collection has over 30 marble effect ranges, from 75 x 75mm tiles to 1600 x 3200mm slabs. Use matt or honed finishes with an R10 rating for floors, and polished finishes for walls, worktops and feature areas.

This guide groups the ranges by format and look, and explains which finishes suit which uses.

Marble effect slabs

For large walls, floors and worktops with few joints, choose a slab. Classic white marbles include Calacatta Oro, Statuario Altissimo, Calacatta Bellissimo, Marmi Arabescato Statuario and Panda White Marble, a bookmatched slab with bold black veining. For larger slabs, the sintered stone ranges in our Slab Collection, such as Calacatta Gold Sintered Stone and Estatuario Sintered Stone, are 3200 x 1600mm in 6, 12 and 20mm, for walls, worktops and vanities.

Coloured marbles

For colour, look at Verde St Denis and Verde Karzai (green), Rosso Imperiale (red), Sodalite Blue (blue), Calacatta Viola, Breccia Sarda, and Tropical Black and Sahara Noir (black). For onyx, look at Onice Pesca and Onyx.

Marble effect tiles for floors and walls

For tile formats, Ferndale Marble comes in 600 x 1200mm in 11 colours, rated R10 B PTV+36. Monument Way Marble comes in 15 sizes, from 75 x 75mm up to 1600 x 3200mm, in matt, polished, honed and brushed finishes. Calacatta Vagli Marble and Calacatta Bettogli Marble run from 298 x 598mm to 2798 x 1198mm, and Calacatta Vagli Marble also comes in 1600 x 3200mm. Middleton Marble has an aged finish in 17 colours, with hex and square mosaics. Calacatta Marble, Silvamara Marble, Milecross Marble and Marbella Reserve Marble come in 300 x 600, 600 x 600 and 600 x 1200mm, with larger formats in some ranges.

Finishes and where to use them

Polished finishes give the deepest shine but often have no slip rating listed, so use them on walls, worktops and dry feature floors. For floors, choose a matt, honed or brushed finish with a rating, such as Ferndale Marble (R10 B PTV+36), Monument Way Marble (R10), or Calacatta Vagli Marble and Calacatta Bettogli Marble (R10 B). Pyro + Echo classes a tile as slip-resistant only if it reaches PTV 36+ in footwear and barefoot wet tests; see our slip rating advice.

Large marble effect slabs need the right adhesive: read Trimline's guide to the best tile adhesive for large format porcelain. For samples and the showroom, see our Pyro + Echo FAQs.

Ranges to look at

FAQs

Is marble effect porcelain suitable for floors?

Yes, if you choose a finish with a suitable slip rating. Ferndale Marble is rated R10 B PTV+36, and Monument Way Marble and Middleton Marble are R10. Many polished finishes have no slip rating listed and are better on walls.

Which marble effect ranges come as large slabs?

Calacatta Oro, Statuario Altissimo and Verde St Denis come in sizes up to 1500 x 3000mm. Panda White Marble is 1600 x 3200mm, and the sintered stone ranges are 3200 x 1600mm.

Should I choose a polished or matt marble effect tile?

Choose polished for the deepest shine on walls, worktops and feature areas, and matt, honed or brushed for floors. Check the slip rating in the range table before using any finish on a floor.

Do you have green or coloured marble effect tiles?

Yes. Verde St Denis and Verde Karzai are green, Rosso Imperiale is red, Sodalite Blue is blue, and Tropical Black and Sahara Noir are black.

Do you have marble effect mosaics?

Yes. Middleton Marble includes hex and square mosaics, and Monument Way Marble comes in small formats down to 75 x 75mm. For more answers, see our Pyro + Echo FAQs.